| Product |
EL-100-2MA |
| Description |
Fast-Ethernet-Switch, managed |
| Article no. |
04420001000 x 000 xxx |
| Port type and amount |
8 Ports in total, max. 4 x 100BASE-FX Ports: ST, SC, E2000 or BIDI-SC, Max. 8 x 10/100BASE-TX Ports: RJ45 |
| Signal LEDs / interfaces |
| Status LEDs |
Failure (red)/Ports (green/ yellow)/Power (green)/Ring (green) |
| Failure relay (load capacity) |
24 VDC (1A) / 60 VDC (0,3 A) |
| Connector |
4 pin terminal (redundant supply) /
4 pin terminal (2 x fault relay) /
USB/Sub-DB9 |
| Fiber type / range / budget |
| Twisted Pair |
0 m – 100 m (Cat5e) |
| Multimode 50 / 125 μm (1 dB / km) |
0 m – 5 km, optical budget 13 dB mit 1300 nm |
Multimode 62,5 / 125 μm
(1 dB / km) |
0 m – 5 km, optical budget 13 dB mit 1300 nm |
Singlemode 9 / 125 μm
(0,3 dB / km) |
0 m – 30 km, optical budget 16 dB with 1310 nm
(other distances on request) |
| Supply |
| Power supply |
12 – 60 VDC (redundant) |
| Power consumption at 24 VDC |
8 Watt, 330 mA |
| Management |
| Management |
SNMP-Management / Web-Interface-Management |
| Standards |
IEEE 802.3 10BASE-T / IEEE802.3u, 100BASE-T(X), 1000BASE-T and 1000BASE-SX or LX / IEEE802.3 Flow Control and Backpressure /
IEEE 802.1d Spanning Tree / IEEE 802.1w Rapid Spanning Tree / IEEE 802.1p Class of Service / IEEE 802.1Q VLAN-Tag |
| Protocols |
PROFINET Class B, Netload Class III |
| MIB |
RFC 1213 MIBII / RFC 1493 bridge MIB / RMON RFC 1757 / RFC 2674 VLAN MIB / RFC 1643 Ethernet as MIB / RFC 1215 Trap MIB private MIB for switch informations, ring, port alarm, TFTP firmware update, reset, port mirror, IP security management, IGMP management MIB |
| Redundancy |
Media redundancy protocol (MRP) according to IEC 62429-2 / rapid spanning tree protocol (RSTP) |
| Other |
SNTP for time synchronisation / IGMP v1 and query modus with 256 groups / DHCP client function / TFTP firmware, TFTP backup and recovery / ingress and egress bandwidth control |
| Permissible ambient conditions |
| Operating temperature |
-40 °C – +55 ºC |
| Constructive design |
| Dimensions (W x H x D) |
145 mm x 70 mm x 130 mm |
| Assembly |
DIN rail |
| Weight |
850 g |
| Protection class |
IP 20 |
| Housing |
Stainless steel, powder coated |
| Technical approvals |
| Basis |
CE |
| cUL61010 |
8TX, 6TX/2FX, 4TX/4FX |
| |
|
