The fiber optic systems DL485-MBP connect a Modbus-Plus interface to optical field bus networks. With the help of this innovative system optical bus, star, tree and mixed structures are possible.
The special multifunctional fiber optic system DL485-MBPR also allows the construction of optical ring structures.
LEDs and potential-free contacts (optional for DL485-MBP) of a fault detector relay are able to signal defective states.
Feel free to ask us, we are here to help you with any question you may have.
Phone: +49 2762 9313-600
Contact us!
| Type | P-ST | H-ST | MM-ST | MM-SC | MM-SC/BIDI | SM-ST | SM-SC | SM-E2 | SM-SC/BIDI |
|---|---|---|---|---|---|---|---|---|---|
| Type | P-ST | H-ST | MM-ST | MM-SC | MM-SC/BIDI | SM-ST | SM-SC | SM-E2 | SM-SC/BIDI |
| Article no. DL485-MBP |
01000 6401 |
01000 6412 |
01000 6421 |
01000 6423 |
01000 6423-BIDI A 6423-BIDI B |
01000 6431 |
01000 6433 |
01000 6435 |
01000 6433-BIDI A 6433-BIDI B |
| Article no. DL485-MBP-2x |
01000 6451 |
01000 6462 |
01000 6471 |
01000 6473 |
01000 6473-BIDI |
01000 6481 |
01000 6483 |
01000 6485 |
01000 6483-BIDI |
| Article no. DL485-MBPR |
01000 8501 |
01000 8512 |
01000 8521 |
01000 8523 |
01000 8523-BIDI |
01000 8531 |
01000 8533 |
01000 8535 |
01000 8533-BIDI |
| FO-connector | ST | ST | ST | SC | SC | ST | SC | E-2000 | SC |
| Fiber type | POF 980/1000 μm |
HCS 200/230 μm |
Multimode 62,5 (50)/125 μm |
Singlemode 9/125 μm |
|||||
| Optical budget | 12 dB | 12 dB | 12 dB | 16 dB | |||||
| FO range | 50 m (180 dB/km) |
200 m (8 dB/km) |
5 km (1 dB/km) |
30 km, others up to 100 km on request (0,3 dB/km) |
|||||
| Wavelength | 650 nm | 850 nm | 1310 nm | 1310 nm 1550 nm |
1310 nm | 1310 nm 1550 nm |
|||
| Data rate max. | 1 MBit/s | ||||||||
| Transmission type | Half duplex | ||||||||
| Signal delay | MODBUS Plus Interface <> LWL: < 400 ns / Tx <> Rx: 500 ns MBPR: MODBUS Plus Interface <> LWL : < 1 μs |
||||||||
| Terminating resistor | Acc. to MODBUS Plus specification there are no terminating resistors | ||||||||
| RS485 Cable length | 50 m | ||||||||
| RS485 Connector | 9-pole Sub-D female and 6-pole terminal | ||||||||
| Status-LEDs | Power supply (green) / Data (yellow) / Status (red) | ||||||||
| Power supply | 12–30 VDC, other voltages on request | ||||||||
| Power consumption | 5 Watts, 200 mA (24 V) | ||||||||
| Potential separation | 500 VDC (24 VDC <> RS485) | ||||||||
| Operating temperature | –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others) | ||||||||
| EMC | EN61000-6-2 / EN55022 Class B + A1 + A2 | ||||||||
| Weight | 570 g | ||||||||
| Dimensions | 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector) | ||||||||
| Housing | Stainless steel, powder coated | ||||||||
eks Engel FOS GmbH & Co. KG
Schützenstrasse 2
57482 Wenden-Hillmicke
Germany
Phone: +49 2762 9313-600
Fax: +49 2762 9313-7906
Your contact person
Directly in touch with the right contact person.
the eks-blog
always informed!
